The Most Common Garage Door Repairs
Garage doors are an essential element of any home. As they serve as the primary entryway, it's essential that they always work correctly and protect against damage. If your door is malfunctioning, it's wise to reach
Garage doors are an essential element of any home. As they serve as the primary entryway, it’s essential that they always work correctly and protect against damage.
If your door is malfunctioning, it’s wise to reach out for professional assistance. Doing so can save time, money and a great deal of frustration.
Fixing a Broken Spring
If your garage door has a broken spring, it can be challenging to open or close. Additionally, the panels may sag and bend when opened due to insufficient spring support for lifting the weight of the panels. If this is the case for you, contact an experienced garage door service provider immediately if any of these symptoms occur.
Unfortunately, fixing a broken spring is possible; however, if possible it would be best to seek professional assistance. Doing so will protect both your home and yourself from further harm.
On average, replacing a garage door spring costs between $200 and $300 total – including hardware and labor. However, this figure varies significantly based on how severe the damage.
For instance, if your spring has been broken for some time and requires replacement, the cost will be higher. It also depends on what type of spring needs replacing and how much work needs done.
Torsion springs are attached to the wall above your garage door and operate through a cable-and-pulley system. They’re commonly found in commercial construction projects as well as rolling door openers.
They usually have a lifespan of 10,000 to 20,000 cycles, depending on how often they’re used. Unfortunately, the more frequently you use them, the shorter their life will be.
Fixing a broken garage door spring is not only expensive, but also an extremely hazardous task that necessitates special tools and experience to do correctly. It is strongly advised against attempting this on your own as the risks could be dire; call in a professional for help so as to minimize injuries.
Fixing a Broken Cable
When your garage door cable breaks, it is essential to address the issue quickly in order to prevent further complications. Not only does a broken cable prevent your door from opening, but it puts other parts of your system at risk as well.
You have two options for replacing the cable: do it yourself or contact a professional to do the job. However, before beginning any task, it’s essential to understand how to spot signs that your cable needs replacing.
One telltale sign that your garage door cable needs replacement is when it appears frayed or worn down. You should also inspect for rust or corrosion, as these elements can eat away at a cable and cause it to break sooner than anticipated.
If your cable has become damaged, it is important to get it repaired promptly. Doing so can save you a considerable amount of money in future repairs.
Another reason to replace your cable is if it’s fraying, making it harder to lift the garage door. As it weakens, pulling on springs and motor can be harder due to increased strain.
In addition to breaking and becoming frayed, a cable can also become loose or lose its tension. This slack could cause your garage door to slant or get out of alignment when opening and closing.
If you notice any of the warning signs, it’s time to contact a local garage door repair company for an expert inspection. They’ll help identify what’s causing the problem and suggest solutions; additionally, this will guarantee your door remains safe for yourself and your family members while using it.
Fixing a Broken Roller
Your garage door rollers are designed to reduce friction as your door slides along its track, and a broken roller can lead to serious problems. If you’re experiencing difficulties with your rollers, contact an expert for assistance.
A roller can be repaired in several ways, or you could simply replace it with another to restore your garage door’s performance. However, if you decide to do the fixing yourself, exercise caution and take proper precautions for safety’s sake.
Before anything else, disconnect the power from your garage door opener so it won’t get damaged in the process. Also inspect the tracks for any damage before trying to reattach the roller.
Once the power and tracks have been disconnected, you can begin replacing your rollers. Start by inspecting the track for any visible damage or dirt; if no visible damage exists, begin cleaning and lubricating to avoid future issues.
Once the track is clean, liberally apply lubricant to each roller before attaching it to the track. This will guarantee smooth motion along the track and help avoid any potential issues in the future.
You can try to put your roller back on by yourself, but it’s always best to let a professional do the job for you. Doing this task without knowledge or expertise can be dangerous if not done properly. A reliable company like Girard’s Garage Door Services knows how to handle this task safely and correctly with their tools and knowledge of getting the job done quickly and efficiently.
Fixing a Broken Track
If you find that one of your garage doors has become stuck on its track, it is critical to address the problem promptly. A damaged or bent track could cause the door to come crashing down unexpectedly, posing a serious risk for injury.
If the track on your garage door is loose, use a wrench with the appropriate socket size to tighten it back to the wall. Doing this will guarantee that your door opens and closes securely every time.
Broken garage door tracks can be a frustrating and annoying issue, but fortunately it’s relatively straightforward to fix if you know how.
Before beginning repair efforts, inspect the track for any dents or other damage. Dents can easily cause your door to come off its track, so make sure you look into this before trying any fixes.
Be on the lookout for cracks in your track, which could be hazardous if not addressed promptly. Furthermore, inspect the back side of your track to see if there are any dents there as well.
Once you’ve identified any dents, use either a hammer or rubber mallet to straighten them out. Doing this will help avoid your garage door from ever again going off track.
Finally, inspect the rollers to confirm they’re properly in place. If not, spray some lubricant onto them for extra lubrication.
If you’re not sure how to fix a broken track, we recommend hiring a professional technician for the job. They can assess the damage, make necessary repairs and replace the track if required. Doing so saves both time and money in the long run while making DIY repair less risky than hiring an expert technician.
Fixing a Broken Light
A malfunctioning garage door opener that features lights can be a frustrating issue. But you don’t have to take action if the issue can be corrected with simple repairs.
First, verify that your garage door is receiving power. If the lights are on when pressing the wall button or there is a LED light in the side panel, this indicates that there is power to your system.
The next step is to confirm the safety sensors are aligned. Otherwise, the small lights on each sensor won’t illuminate.
It is recommended to clean the sensors at least once annually, since dirt and moisture can hinder their performance. You can use a mild cleaner to gently remove any debris.
If the problem persists, contact a nearby garage door repair service for assistance. It may be necessary to replace the sensors if they have become blocked by something.
Another common issue with garage door lights is a broken connection in the wiring. The connections connecting the light socket to the motor are brass and can bend out of shape over time.
Lights that are insufficiently wired may not work correctly, as the bulb won’t receive adequate power. If your light socket is in good condition, simply reconnect the wires for proper operation.
If your garage door opener has a more serious issue, such as circuit board failure, replacing the entire board may be necessary. While this task may seem intimidating at first glance, it doesn’t need to be impossible with some simple tools and help from an experienced handyman.