According to Nielsen, there are more than 120 million homes in the United States with televisions in them. Thanks to streaming and smart TVs, televisions are becoming more popular and accessible. If you’re planning on getting a new television, then it is important that you know how to install a TV.
If you don’t know the right way to install a TV, then your television could end up falling and breaking. You could even end up messing up the wall that you install it to.
Luckily for you, we are here to help. So keep on reading and we will walk you through everything that you will want to know!
Choosing a TV Mount
When you are learning how to install a television, the first thing that you need to do is pick a wall mount. There are different kinds of TV wall mounts.
A fixed television wall mount will keep the TV in a single position, flush against your wall. You can also get a swivel wall mount that will let you pivot the screen from side to side.
There are also wall mounts that tilt so that you can change the angle of the TV. Lastly, there are full-motion wall mounts that give you the most flexibility with how you position your television.
When it comes to mounting a TV, you will need to consider both weight and size. Make sure that your television is acceptable under the mount’s guidelines.
Choose Location and Height
Once you pick which mount you want, you’re then going to have to figure out where to actually mount it. Before you start drilling anything, think very carefully about where you want to put the TV.
Choose a spot that has easy access to connections for speakers and accessories, cable input sources, and power outlets. See where components like Blu-ray players, gaming systems, and cable boxes will be put.
Think about installing a shelf under the mounted television so that you can store your necessary equipment.
You also want to avoid direct sunlight, vibrations, and heat. Don’t put your TV somewhere that gets a lot of traffic.
You also want to choose a wall that can hold the weight of the TV. Your wall should be able to adequately hold four times the combined load of the equipment and all of the hardware and pieces that are attached.
You’ll also need to think about how high the wall should be mounted. A lot of people install their TV without thinking about this.
The ideal viewing height is to center the monitor at eye level when you are sitting down. A lot of people might think this is too low, however.
You want the bottom of the display to not be higher than eye level when you sit. The top of the TV should not be above eye level when you stand.
Remember, when you install a TV, you should “measure twice and cut once.” Try to sit in different seats in the room and get an idea of how you will be able to see the television screen of those positions.
Attach the Mount to the Wall
Have a buddy hold the mount against the wall while you drill pilot holes. With your drill, drive the screws that are attached to the TV mount to the wall.
Take a step back and make sure that the wall mount is level.
A good tip is to drive in each screw halfway. You can then check to make sure that everything is level before you fully tighten all of the screws.
Attach the Mounting Plate to the TV
The kind of TV mount that you have is going to determine how you will put the mount onto the back of your television. For example, a full-motion television wall mount is going to require that you take different steps than if you got a stationary mount.
This is why you should always follow the manufacturer’s instructions when attaching the mounting plate to the back of the television.
Mount the TV to the Wall
A television can be as heavy as it is delicate. Depending on how big the television is and where you decide to hang it, you should make sure that you get the help you need to mount it safely.
Televisions are expensive and can be dangerous. Don’t take chances or be impatient.
Make sure to follow all of the television’s specific manufacturer’s instructions for mounting to a wall.
You should also make sure that you double-check that your connection between the television plate and the wall plate is safe. Get a cord cover and hide the cables that are dangling from the bottom of the television if they are not installed behind your wall.
Once you get your television mounted, it’s time to install your antenna. Of course, you want to make sure that you get a free quote before you do that.
The Importance of Knowing How to Install a TV in Your Home
Hopefully, after reading the above article, you now have a better idea of how to install a TV in your home. As we can see, it’s not necessarily easy to install a TV. But doing so properly will make sure that you have an enjoyable viewing experience.
Are you looking for other helpful articles? If you are, make sure to check out the rest of our site today for more!
